Woodhaven 8660: SOSS 100 Hinge Jig Manual de usuario descargar pdf

Parts List:

Please identify and verify that you have all of the parts

listed below prior to assembly.

Part Description . . . . . . . . . . . Quantity

8660 Hinge Jig for SOSS 100. . . . . . . . . . . . . . . . . . . 1

4008 8” Double Track. . . . . . . . . . . . . . . . . . . . . . . . . 1

MF010 1/4-20 x 3/4" flat head screw . . . . . . . . . . . . . 2

5760B 1/4-20 oval nut . . . . . . . . . . . . . . . . . . . . . . . . . 2

8660T 2-7/8" One Track. . . . . . . . . . . . . . . . . . . . . . . . 2

MF001 10-24 x 5/16” flat head screw. . . . . . . . . . . . . 2

5750B 10-24 oval nut . . . . . . . . . . . . . . . . . . . . . . . . . . 2

8660

SOSS 100 Hinge Jig

Owners Manual

Please Read Carefully!

BEFORE BEGINNING

Identify and verify that you have all the

parts listed. Read thru the instructions at least

once, familiarizing yourself with the parts and

their use before proceeding. You'll need a #2

& #3 Phillips screwdriver for assembly.

The 8660 SOSS Hinge Jig is designed to

work with a 5/8" bushing (our PN 5030K) and

a 3/8" upcut spiral bit (our PN 15406). If you

have your own 5/8" bushing, make sure the nose

isn't over 3/8" long. You'll need a plunge router

to cut the hinge mortises. The quality of the plunge mechanism

can effect the size of the mortise, resulting in a poor fit if the

plunge mechanism has excessive slop. Note: The pictures in the

instructions are of the 8663 SOSS 203 Hinge Jig, but all of the

SOSS Hinge Jigs assemble, and function, the same way.

ASSEMBLY

Insert the two 1/4-20 x 3/4" flat head screws (MF010)

thru the larger countersunk holes in the SOSS Hinge Jig (8660-

8664). Start a 1/4-20 oval nut (5760B - flat side first) on the

end of each screw. Slide the 8" Double Track (4008) on to the

oval nuts and in the groove in the underside of the Hinge Jig

until centered end-to-end, then tighten the screws. See fig. 1.

Insert the two 10-24 x 5/16" flat head screws (MF001)

thru the remaining two countersunk holes in the Hinge Jig and

start a 10-24 oval nut (5750B - raised side first) on the end of

each screw. Slide a 2-7/8" One Track (8660T) on to each oval

nut and in to the grooves in the underside of the Hinge Jig until

covering the oval nut, then tighten each screw. See fig. 1

Turn Page Over

SOSS 204

SOSS 203

SOSS 101

SOSS 100

MF001 &

5750B x 2

MF010 &

5760B x 2

8660T

x 2

4008

8660-8664

SOSS Hinge Jig

1 2

Indice de contenidos

Pagina 1 - Please Read Carefully!

1Parts List:Please identify and verify that you have all of the parts listed below prior to assembly.Part Description . . . . . . . . . . . Quantity8

Pagina 2

USAGE The SOSS Hinge Jig has the correct setback for your SOSS hinge built-in. Always index the face of the work against the Double Track and an edge

Comentarios a estos manuales

Sin comentarios

Woodhaven 8660: SOSS 100 Hinge Jig Manual de usuario

Busca en linea o descarga Manual de usuario para Herramientas Woodhaven 8660: SOSS 100 Hinge Jig. Woodhaven 8660: SOSS 100 Hinge Jig User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Woodhaven 8660: SOSS 100 Hinge Jig