Woodhaven Heavy Duty Manual de usuario descargar pdf

BEFORE BEGINNING

Identify and verify

that you have all the

parts listed. Read the

instructions at least once

to fully understand how the

HD Door Templates work.

Each set of templates (rail and panel) are the same length.

The template sets (rail and panel) are designed with a 5/16"

offset to allow the machined tongue of the panel to fit in the

machined groove in the rail, however the templates sets them-

selves do not mesh together.

The HD Door Templates must be used with the HD Panel

Master (5432) and HD Frame Master (5433). Their respective

directions provide more information on using the templates.

APPLY LABELS TO TEMPLATES

Each templates part size limit (6-7", 7-8", etc.) is printed

at the top of the labels that are supplied with each template set.

To avoid the labels being damaged in shipping, it's necessary for

you to apply them.

Separate the 10 rail templates (they have notches along

one edge) and 10 panel templates (no notches) and stack them

in two piles with the shortest templates on top and the longest

on the bottom. Apply the two smallest part size labels (6-7") to

the two smallest templates, etc. See fig. 1.

Note the center mark on the bottom straight edge of each

template, which is used to align and center your work to the

template.

STOCK SIZE

The templates are designed for 4" wide rails (1-3/4" rise,

5457 & 5467) or 5" wide rails (2-3/4" rise, 5458 & 5468). The

Arched Templates (5567 or 5468) may cut a slightly narrower

width than 4" or 5", depending on the overall length of the rail.

See fig. 2.

The size of the assembled frame printed on the label will

vary if the cutting depth of your cope & pattern bit is different

from that shown, or if you don't use 2-1/4" wide stiles.

You can make your stiles wider than 2-1/4", but the rail

will never be wider than 2-1/4" at the narrowest point.

If you want rails narrower then 2-1/4", rip them down after

using the template.

©Copyright WOODHAVEN INC. 11/18/10

(800) 344-6657 or WWW.WOODHAVEN.COM

Heavy Duty

Door Templates

Owners Manual

Please Read Carefully!

Rail

Stile

Depending on the

template set purchased,

the widest point of the

rail is between 4"-5"

(View of assembled door

components)

2-1/4"4"-5"

2-1/4"

Rail

6" to 7" Rail

Cope & Pattern Joint: 3/8" Proﬁ le

Assembled Size: 9-3/4" to 10-3/4"

Quantity Item

20 . . . . . . . . . . . . . . . . . Templates

20 . . . . . . . . . . . . . . . . . . . . Labels

Indice de contenidos

Pagina 1 - Owners Manual

BEFORE BEGINNING Identify and verify that you have all the parts listed. Read the instructions at least once to fully understand how the HD Door Temp

Comentarios a estos manuales

Sin comentarios

Woodhaven Heavy Duty Manual de usuario

Busca en linea o descarga Manual de usuario para Herramientas Woodhaven Heavy Duty. Woodhaven Heavy Duty User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Woodhaven Heavy Duty